Garage Door Opener Repair & Installation in Brighton, CO

If the door itself moves freely by hand but won't run on the opener, the problem is usually in the opener, its sensors, or the remote. If the door is heavy or binding, the opener is often just reacting to a door problem. A technician should check both.

Common opener problems

• Door reverses before closing: blocked or misaligned safety sensors, ice or debris on the floor, or force/travel settings that need adjusting
• Motor hums but nothing moves: a stripped drive gear, a problem with the trolley or carriage, or a door that is too heavy because of a broken spring
• Remote or keypad doesn't work: dead battery, lost programming, or the wall control's lock feature turned on
• Opener works some days and not others: loose wiring, a failing logic board or sensor, or cold-weather resistance
• Very loud operation: worn chain or drive parts, or door hardware that needs lubrication

Quick checks you can do safely

1. Make sure the opener is plugged in and the outlet has power. Check the breaker and any GFCI outlet in the garage.
2. Wipe the two safety sensor lenses near the floor and check their indicator lights.
3. Replace the remote battery and check whether the wall control has its lock or vacation mode on.
4. With the door fully closed, pull the emergency release and lift the door by hand. If it's heavy or won't stay halfway, the problem is the door (often the springs), not the opener. Stop there and request service.

Choosing a new opener

Chain-drive openers are durable and widely used but louder. Belt-drive models are quieter, which matters if there's a bedroom above or next to the garage. Wall-mount (jackshaft) openers mount beside the door and free up the ceiling. Many newer openers add Wi-Fi app control, battery backup and built-in cameras or lights. A technician can help you match the opener to your door's size and weight.

Areas served

Opener Repair & Installation requests from Brighton, Commerce City, Thornton, Henderson, Lochbuie, Fort Lupton, Todd Creek, Hudson, Keenesburg.

Frequently asked questions

Why does my garage door open by itself?

Common causes include a stuck button on a remote or wall control, a remote or keypad that has been programmed to a neighbor's opener, interference, or a failing wall control or logic board. Start by removing remote batteries one at a time to see if the problem stops.

Is it worth repairing an old garage door opener?

It depends on the part and the opener's age. Simple fixes like gears, sensors and wall controls are often worth doing. If the opener is old, lacks current safety features, or needs a major part like a logic board or motor, replacement may make more sense.

Related services

• Garage Door RepairRepairs for doors that are stuck, noisy, crooked or won't respond.
• Broken Spring RepairTorsion and extension spring replacement, done safely.
• Off-Track & Cable RepairDoors off their tracks, crooked doors and snapped or frayed cables.
• Emergency & Same-Day RepairDoor stuck open, stuck shut, or a car trapped inside.
• Roller, Hinge & Track RepairNoisy, jerky or scraping doors fixed at the hardware.
• Panel Replacement & Hail DamageDented, cracked or hail-damaged sections replaced or assessed.
• New Garage Door InstallationReplacement doors sized and installed for your home.
• Tune-Up, Maintenance & Weather SealsSeasonal tune-ups and bottom seal and weatherstrip replacement.
• Commercial Overhead Door RepairSectional and roll-up doors for shops, warehouses and farms.

Winter problem? Read why garage doors won't open in cold weather.